Yaesu FT-8900R Ham Radio : Storing and Case

Yaesu FT-8900r Quad-Band Ham RadioIn this post I will go over how I store my 8900R and what I store with it.

In two previous articles I went over the Yaesu FT-8900R radio and accessories. Both articles are worth the read:

Yaesu FT-8900R Ham Radio – Part #1
Yaesu FT-8900R Ham Radio – Part #2

So let’s go over my standard format, what is the mission for all of this?

 

Mission –

To safely store the radio and all components with which to operate the radio.

Requirements & Restrictions –
  1. Cases must be sturdy, at least to military specifications.
  2. Cases musty protect against dust, dirt, and water impingement.
  3. Cases should protect the contents against damage due to reasonable heights and rough handling.
  4. Cases should be low profile and not draw attention to them.
  5. Case should be light enough for one person to easily carry.

SKB i-series 3I-1711--68-C.The case I chose was the SKB i-series 3I-1711–68-C. These cases are waterproof and as sturdy, if not more so, that Pelican cases. And they are cheaper that Pelican cases. They come with “cubed” foam ready to be cut to size for your equipment.

 

 

SKB i-series 3I-1711--68-C for the Yaesu FT-8900R

 

 

So this is what my case looks like for my Yaesu FT-8900R.  The case is clearly labeled for easy identification.

SKB i-series 3I-1711--68-C for the Yaesu FT-8900RYaesu FT-8900R Radio Case –

Bottom Level:

  • 1 x Power supply, AC, 19amp
  • 1 x Mounting bracket, radio
  • 1 x Microphone, MH-48
  • 1 x Radio, Yaesu FT-8900R

 

SKB i-series 3I-1711--68-C for the Yaesu FT-8900RMiddle Level:

  • 1 x Power cord, AC

 

 

 

 

SKB i-series 3I-1711--68-C for the Yaesu FT-8900RTop Level:

  • 1 x 5′ Power extension cable, Anderson Power Poles on both ends
  • 3 x packages various mounting screws.
  • 1 x Mounting bracket, remote head
  • 1 x RT Systems Programming CD
  • 1 x RT Systems Programming cable
  • 1 x Power cable, Anderson Power Poles to hard soldier connection (AC power supply)
  • 1 x Cable, radio head to radio body
  • 2 x Fuses, 15amp

On top of the radio I place a 8900 user’s manual in a 1-gallon Ziplock bag with the latest copy of the US Amateur Radio Bands chart.

I have given you a list of the equipment needed to run the Yaesu FT-8900R Ham radio. Is it everything you might need?  This was meant strictly for the radio equipment itself and the essential equipment to get it going.

Take this list and use it as a starting point for your specific need and mission.

 

Copyright © AHTrimble.com ~ All rights reserved
No reproduction or other use of this content without expressed written permission from AHTrimble.com
See Content Use Policy for more information.

10 thoughts on “Yaesu FT-8900R Ham Radio : Storing and Case

  1. Pingback: My “Power-Box” project – Part #3 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  2. Pingback: My “Power-Box” project – Part #2 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  3. Pingback: Radio Antenna Storage Case | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  4. Pingback: My “Power-Box” project – Part #1 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  5. Pingback: “Truly Portable Ham in the Box” project – Yaesu FT-8900R Go-Box – Part #2 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  6. Pingback: “Truly Portable Ham in the Box” project – Yaesu FT-8900R Go-Box – Part #1 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  7. Pingback: Bug-Out or Bug-In : Part #1 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  8. Pingback: My “Ham-In-The-Box” project – Yaesu FT-8900R Go-Box – Part #3 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  9. Pingback: My “Ham-In-The-Box” project – Yaesu FT-8900R Go-Box – Part #2 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

  10. Pingback: My “Ham-In-The-Box” project – Yaesu FT-8900R Go-Box – Part #1 | A.H. Trimble - Emergency preparedness information for disasters and grid-down

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s